At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers.
Check the results in the table below.
Please note that the gateway (hub) compatibility was updated on 14.3.2018 and it may not include the latest testing data.
✓ | Supports | ✗ | Unsupported | ⊛ | Check comment | ⊤ | Testing | Q1, Q2, … | Module physical output | I1, I2, … | Module physical input |
# | Gateway | Q1 (physical output) + Q2 (physical output) |
Q1 (physical output) | Q2 (physical output) | W | W (Q1 – phisycal output) |
W (Q2 – physical output) |
kWh | kWh (Q1 – physical output) |
kWh (Q2 – physical output) |
Temperature sensor | Comments | Date of last test |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Zwave me | ⊛ | ✓ | ✓ | ⊛ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ✓ | Total W updated when polled. Q1+Q2 works but is not updated unless polled or lifeline is changed. | 7/4/2018 |
2 | Cockpit | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ||
3 | Fibaro HC Lite v 4.130 | ✓ | ⊛ | ⊛ | ✓ | ⊛ | ⊛ | ⊤ | ⊤ | ⊤ | ✓ | After inclusion only root node is updated, all nodes work. Setting multichannel lifeline updates both relays but not root node. | |
4 | Zipabox 1.3.24 | ⊛ | ✓ | ✓ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ✓ | Additional setup is needed. | 7/4/2018 |
5 | Vera edge v 1.7.350 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ⊛ | ⊛ | ✓ | Works with temperature sensor attached. | 7/4/2018 |
6 | SmartThing 000.021.00012 | ✓ | ⊛ | ⊛ | ✗ | ✗ | ✗ | ✗ | ✗ | ✗ | ✗ | When temperature sensor is connected there is no Q1 and Q2 buttons. | 7/4/2018 |
7 | Devolo | ✗ | ✓ | ✓ | ✗ | ✗ | ✗ | ⊤ | ⊤ | ⊤ | ✗ | kWh will be tested. | 7/4/2018 |
8 | NETIChome | ✓ | ✓ | ✓ | ✗ | ⊛ | ⊛ | ⊤ | ⊤ | ⊤ | ✓ | Power consumption is shown for a last change of either relays on root node. | 6/26/2018 |
9 | Homey 1.0.4 | ✗ | ✓ | ✓ | ✗ | ✗ | ✓ | ✓ | ✗ | ✗ | ⊛ | Set multichannel lifeline. | 4/16/2018 |
10 | Eedomus | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✓ | 6/4/2018 | |
11 | Verbund | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✓ | ||
12 | Domoticz V3.5877 | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✓ | ||
13 | Homeseer 3.0.0.368 | ✗ | ✓ | ✓ | ✓ | ✓ | ✓ | ✗ | ⊤ | ⊤ | ✓ | kWh will be tested. | |
14 | Piper | ✓ | ✗ | ✗ | ✗ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✗ | 3/2/2018 | |
15 | Open zwave | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✓ | ||
16 | Jeedom | ✓ | ✓ | ✓ | ⊛ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ✓ | The measure of consumption is not automatic, we need to active the pooling (configuration: Values and refresh). | |
17 | Indigo 7 | ✗ | ✓ | ✓ | ✗ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ✓ | kWh will be tested. | |
18 | ImperiHome | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ✓ | kWh will be tested. | 1/19/2018 |
19 | OpenHAB | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ✗ | 1/24/2018 | |
20 | Zipatile | ✓ | ✓ | ✓ | ✓ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | ⊤ | 2/2/2018 | |
21 | SmartThings 3rd party | ✓ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | ⊛ | Install additional device handlers(2 relay and metering child devices). | |
22 | Schwaiger 3.3.0 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ⊛ | ⊛ | ⊛ | ✓ | kWh update after polling. | 8/9/2018 |