Where to buy
Fill the form to download the product manual

Flush Dimmer – Compatibility specifications

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers. Check the results in the table below.

NOTE: The compatibility table may not include the latest testing data, please check the last column for the date of the last test.

Supports Unsupported Check comment Testing Q1, Q2, … Module physical output I1, I2, … Module physical input
# Gateway Dimming W kWh I2 (physical input) UI I3 (physical input) UI Temperature sensor Comments Date of test
1 Zwave me When module is included without temperature sensor and no endpoint enabled single channel lifeline must be set. 25/05/2018
2 Cockpit
3 Fibaro HC Lite v 4.130 I2 and I3 need manual configuration. 21/05/2018
4 Zipabox 1.3.24 12/06/2018
5 Vera edge v 1.7.350 08/05/2018
6 SmartThings
7 Devolo kWh will be tested.
8 NETIChome
9 Homey
10 Eedomus
11 Verbund
12 Domoticz V3.5877
13 Homeseer I2 and I3 need manual configuration. kWh will be tested.
14 Piper
15 Open zwave
16 Jeedom Need to change command class 38 to 48.
17 Indigo 7 I2 and I3 need manual configuration. kWh will be tested.
18 ImperiHome kWh will be tested.
19 OpenHAB
20 Zipatile
21 SmartThings 3rd party When excluding the device, after using this handler, the device needs to be excluded via long reset. Additional sensor handlers need to be installed.
22 Schwaiger 3.3.0 Works only when both inputs enabled. 28/05/2018