Where to buy
Fill the form to download the product manual

Flush ON/OFF Thermostat – Compatibility specifications

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers. Check the results in the table below.

NOTE: The compatibility table may not include the latest testing data, please check the last column for the date of the last test.

Supports Unsupported Check Comment Testing Q1, Q2, … Module physical output I1, I2, … Module physical input
# Gateway Heat W kWh I1 (physical input) UI I2 (physical input) UI I3 (physical input) UI Temperature Comments Date of test
1 Zwave me Polling needed when no endpoint set. 5/11/2018
2 Cockpit
3 Fibaro HC Lite v 4.130 Endpoints need multi-channel association. Polling must be set for kWh. 5/4/2018
4 Zipabox 1.3.24 Extra configuration needed. 6/7/2018
5 Vera edge v 1.7.350 When endpoints are enabled some functions are lost.
6 SmartThings
7 Devolo Output(heat) works but not according to setpoint. 2/23/2018
8 NETIChome
9 Homey
10 Eedomus
11 Verbund
12 Domoticz V3.5877 Unable to configure setpoint
13 Homeseer I1, I2 and I3 don’t update UI in some configurations, but function properly(setpoint set, change mode, window sensor,…) Power consumption is shown after polling. 3/15/2018
14 Pipper Fully incompatible.
15 Open zwave Unable to set setpoint.
16 Jeedom
17 Indigo 7
18 ImeriHome I1 updates UI only when parameter 11 is 1 . kWh will be tested. 1/26/2018
19 OpenHab 2/6/2018
20 Zipatile
21 Schwaiger 3.3.0 Polling needed. 5/11/2018